Mobile Charging for Electric Construction Equipment

2026-08-29

последний случай компании о Mobile Charging for Electric Construction Equipment 0

Case: A mobile battery energy storage and charging unit for electric construction machinery.

Challenge: Work zones change as a project progresses, so fixed chargers cannot always reach active equipment. Site power may also be insufficient for several machines charging at the same time.

Solution: Deploy the Door Energy MCP-A near excavators, loaders and site vehicles. The trailer combines 210kWh energy storage with up to 180kW DC output and can be relocated as the project moves.

Key Features:

High-power charging: Up to 180kW from one connector, or two 90kW outputs.
Energy storage: 210kWh provides an energy buffer where grid capacity is limited.
Connector options: CCS1 or CCS2 can be configured for the target fleet.
Mobile deployment: The trailer can move between work zones and project phases.
Site suitability: Designed for temporary sites and dispersed equipment locations.

Impact: Reduce travel to distant chargers, keep equipment closer to the work area and support phased electrification without installing a permanent charger at every location.

Мобильный заряжатель EV

Мобильная световая башня

Заряжатель ev DC

Заряжатель ev AC

Мобильный заряжатель EV

Мобильная световая башня

Заряжатель ev DC

Заряжатель ev AC

Mobile Charging for Electric Construction Equipment

Mobile Charging for Electric Construction Equipment